Technical Information
The figures that follow are typical properties achieved in
laboratory tests at 20 oC and at 50% Relative Humidity.
Fire Resistance : BS476:Part 7:1987 Class 1 Surface spread of flame
Temperature Resistance : Tolerant up to 70 oC
Vapour Permeability : ASTM: E96:90-20g/ m2/mm /24 hr
Surface Hardness : 182 secs. Koenig Hardness Test
Chemical Resistance : Go to www.flowcrete.com
Bond Strength : Greater than cohesive strength of substrate. >1.5 MPa.

Speed of Cure
10°C 20°C 30°C
Light traffic 24 hrs 12 hrs 8 hrs
Full traffic 36 hrs 24 hrs 16 hrs
Full chemical cure 14 days 7 days 7 days
Low relative humidity and good ventilation are pre-requisites to
achieving the above drying times.

Aftercare-Cleaning and Maintenance
Clean regularly with a mildly alkaline detergent .Visit our
website for more information www.flowcrete.com.

Important Note
Flowcrete’s products are guaranteed against defective
materials and manufacture and are sold subject to its
standard Terms and Conditions of Sale, copies of which
can be obtained on request.

Further Information
To ensure you are specifying a fit for purpose product for
your project please consult our Technical Advisors on the
number below or visit our website to register your interest
in specifying one of the most durable floors on the market.