TDS – Flowchem VE GL 130114 – Bukit Karya Lestari

PT BUKIT KARYA LESTARI ditunjuk sebagai Agent dan Applicator of Flowcrete Asia In Indonesia (www.flowcrete.com)

Telp : (031) 8432881
Email: bukitkarya_lestari@yahoo.com

General Contractor, Supplier & Trading
Jl. Bendul Merisi Besar No.3 Surabaya, 60239

Open in Google Maps

Home
Rustik Natural Stone Finishes
TDS – Flowchem VE GL 130114

August 8, 2022

TDS – Flowchem VE GL 130114

TDS - Flowchem

Description

A roller or spray applied vinyl ester resin based Fiberglass reinforced lining system providing excellent chemical resistance, thermal resistant and protecting concrete or steel structures from various mechanical stresses. The system can be applied up to 3mm thick.

Typical Uses

For protection of concrete and metal structures subject to continuous or occasional exposure to aggressive chemicals, thermal and mechanical stress.

Beneﬁts

Excellent thermal resistance, up to 165 oC
Excellent chemical resistance
Rapid curing
Hygienic and easy to clean
High abrasion resistance
Various resin types available to meet specific chemical and temperature exposure requirements

Project References

HSBC, Hong Kong

System Design

Model Specification
Product: Flowseal EPW
Finish: Satin
Thickness: 0.14 mm Dry Film Thickness
Colour:
Preparatory work and application in accordance with
manufacturers instructions.
Manufacturer: Flowcrete Asia Sdn Bhd
Telephone: Customer Service - +603 6277 9575
The installation should be carried out by a Flowcrete
approved applicator.
Substrate Requirements
A smooth, dense substrate such as finishing plaster or
similar is recommended to ensure the best finish is
achieved.

Products Included in this System
Flowseal EPW (density = 1.2 kg/l)
1st coat :Flowseal EPW 0.1 kg/m2
2nd coat :Flowseal EPW 0.1 kg/m2
3 nd coat :Flowseal EPW 0.1 kg/m2
Detailed application instructions are available upon request.

Installation Service
The installation should be carried out by a Flowcrete
approved applicator. Obtain details of our approved
applicators by contacting our customer service team.

Focus on the Floorzone
Flowcrete Asia Sdn Bhd is a division of the Flowcrete
Group, world leaders in specialist industrial and
commercial flooring. Systems available include:underfloor
heating systems, floor screeds, surface damp proof
membranes, decorative floor finishes, seamless terrazzo,
car park deck waterproofing, tank lining systems.
Our objective is to satisfy your Floorzone needs.

Technical Information
The figures that follow are typical properties achieved in
laboratory tests at 20 oC and at 50% Relative Humidity.
Fire Resistance : BS476:Part 7:1987 Class 1 Surface spread of flame
Temperature Resistance : Tolerant up to 70 oC
Vapour Permeability : ASTM: E96:90-20g/ m2/mm /24 hr
Surface Hardness : 182 secs. Koenig Hardness Test
Chemical Resistance : Go to www.flowcrete.com
Bond Strength : Greater than cohesive strength of substrate. >1.5 MPa.

Speed of Cure
10°C 20°C 30°C
Light traffic 24 hrs 12 hrs 8 hrs
Full traffic 36 hrs 24 hrs 16 hrs
Full chemical cure 14 days 7 days 7 days
Low relative humidity and good ventilation are pre-requisites to
achieving the above drying times.

Aftercare-Cleaning and Maintenance
Clean regularly with a mildly alkaline detergent .Visit our
website for more information www.flowcrete.com.

Important Note
Flowcrete’s products are guaranteed against defective
materials and manufacture and are sold subject to its
standard Terms and Conditions of Sale, copies of which
can be obtained on request.

Further Information
To ensure you are specifying a fit for purpose product for
your project please consult our Technical Advisors on the
number below or visit our website to register your interest
in specifying one of the most durable floors on the market.