Description

Flowfresh RT is a 6–9mm heavy duty, chemical resistant antimicrobial polyurethane resin floor screed providing a durable textured coloured floor finish. Flowfresh RT incorporates Polygiene® - a performance based anti-microbial which inhibits the growth of bacteria, fungi, molds and mildew.

Typical Uses

Ideal for wet processing zones such as food manufacturing, food preparation areas and any environment where there is a requirement for high performance.

Benefits

  • Proven Anti-microbial performance
  • High chemical resistance
  • Easy to clean and sterilise anti-slip surface, minimal joints
  • Heat resistant to 120°C
  • Steam cleanable
  • Freeze/thaw resistant
  • Non tainting and non dusting
  • High abrasion resistance
  • Withstands high mechanical stress
  • Good alternative to expensive acid resistant tiles
  • Low odour during application
  • Positive slip resistance
  • Monolithic application

Project References

Food: Nestlé, Mars, McVities, Courage Brewery, Grants Whisky Pharmaceutical: Astra Zeneca, Pfizer, Bayer, GlaxoSmithKline, Levers

System Design

Model Specification
Product: Flowfresh RT
Finish: Matt
Thickness: _____mm (6, 8 or 9 mm)
Colour:
Preparatory work and application in accordance with
manufacturers instructions.
Manufacturer: Flowcrete Asia Sdn Bhd.
Telephone: Customer Service +603 6277 9575

Substrate Requirements
Concrete or screed substrate should be a minimum of
25N/ mm2, free from laitance, dust and other
contamination. The substrate should be dry to 75% RH as
per BS8204 and free from rising damp and ground water
pressure.

Available in Multi-Pack Supply Format
-Flowfresh HF/MF/RT/SL (A & B)
-Flowfresh HF/MF/RT Filler C
-Flowfresh RT Filler D

Products Included in this System
Primer (if required): Flowprime @ 0.2 kg/m2
Topping: Flowfresh RT (Density 2.0 kg/l)
@ 12 kg/m2 for6 mm
@ 16 kg/m2 for8 mm
@ 18 kg/m2 for9 mm
Detailed application instructions are available upon request.

Installation Service
The installation should be carried out by a Flowcrete
approved applicator. Obtain details of our approved
contractors by contacting our customer service team.

Focus on the Floorzone
Flowcrete Asia Sdn Bhd is a division of the Flowcrete
Group, world leaders in specialist industrial and
commercial flooring. Systems available include: underfloor
heating systems, floor screeds, surface damp proof
membranes, decorative floor finishes, seamless terrazzo,
car park deck waterproofing, tank lining systems.
Colour Stability

Flowfresh RT is not colour fast and may change colour
over time (exhibits a yellowing effect). Colour change
depends on the UV light and heat levels present and
hence the rate of change cannot be predicted. This is
more noticeable in light colours and blues but does not
compromise the product’s flexibility or chemical resistance
characteristics.

Microbial / Fungal Resistance
The Polygiene anti-microbial additive incorporated into
Flowfresh RT provides control of most bacteria and
fungi which come into contact with the floor

Technical Information
The figures that follow are typical properties achieved in
laboratory tests at 20 oC and at 50% Relative Humidity.

Speed of Cure
10°C 20°C 30°C
Light traffic 36 hrs 24 hrs 12 hrs
Full traffic 72 hrs 48 hrs 24 hrs
Full chemical cure 10 days 7 days 5 days

Aftercare-Cleaning and Maintenance
Clean regularly using a single or double headed rotary
scrubber drier in conjunction with a mildly alkaline
detergent. Visit our website for more information
www.flowcrete.com.

Important Note
Flowcrete’s products are guaranteed against defective
materials and manufacture and are sold subject to its
standard Terms and Conditions of Sale, copies of which
can be obtained on request.

Further Information
To ensure you are specifying a fit for purpose flooring
system for your project please consult our Technical
Advisors on the number below or visit our website to
register your interest in specifying one of the most durable
floors on the market.
Fire Resistance BS476-7:Surface spread of
flame: Class 2 Indicative)
Slip Resistance BS6677:Part 1 1986
Pendulum Slip Test
Dry 100 Wet min 35
Impact Resistance BS8204 Part1 Cat:A
(<0.5mm)ISO6272
1kg weight >1.8m
2kg weight >1.5m
Thermal Resistance From–25oC to 90oC (at 6mm)
From–45oC to 105oC (at 8mm)
Water Permeability Nil – Karsten test
(impermeable)
Vapour Permeablity ASTM E96:90
3g/m2/24hrs (at 9mm thick)
Chemical Resistance Go to www.flowcrete.com
Excellent resistance to sugars
and most acids (organic and
inorganic)
Abrasion Resistance ASTM D4060 Taber
Abrader:25mg loss per 1000
cycles(1kg load using H22
wheels) BS8204: Part 2: Class
AR2
Compressive Strength > 50 N/mm2 (BS6319)
Flexural Strength 20 N/mm2 (BS6319)
Tensile Strength 10 N/mm2 (BS6319)
Bond Strength Greater than cohesive strength
of25 N/mm2 concrete. >1.5

TOP

Hi there! Click on our admin below and we'll get back to you shortly.

Chat WhatsApp

Powered by themekiller.com anime4online.com animextoon.com apk4phone.com tengag.com moviekillers.com