Flowfresh MF is a 3-4 mm chemical resistant, antimicrobial polyurethane resin floor system with smooth matt coloured finish. Flowfresh MF incorporates Polygiene® - a performance based anti-microbial which inhibits the growth of bacteria, fungi, moulds and mildew.

Typical Uses

Ideal for dry or semi-wet processing zones such as food or pharmaceutical packaging zones.


  • Proven Anti-microbial performance
  • High chemical resistance
  • Easy to clean and sterilise
  • Minimal joints
  • Non-tainting and non-dusting
  • High abrasion resistance
  • Low odour during application
  • Fast return to service

Project References

B. Food, Saha Farms, CP, Sun Valley, Nestle, Ajinomoto, Malee Sompran, Thai International Airway, Panus Poultry

System Design

Model Specification
Product: Flowfresh MF
Finish: Matt
Thickness: _____mm (3 or 4mm)
Preparatory work and application in accordance with
manufacturer’s instructions.
Manufacturer: Flowcrete Asia Sdn Bhd.
Telephone: Customer Service - + 603 6277 9575
The installation should be carried out by a Flowcrete
approved applicator.

Substrate Requirements
Concrete or screed substrate should be a minimum of
25N/ mm2, free from laitance, dust and other
contamination. The substrate should be dry to 75% RH as
per BS8204 and free from rising damp and ground water

Available in Multi-Pack Supply Format
-Flowfresh HF/MF/RT (A+B)
-Flowfresh HF/MF/RT Filler C

Products Included in this System
Primer : Flowprime @ 0.2 kg/m2
Topping : Flowfresh MF (density 1.9 kg/l)
@ 5.7 kg/m2 for 3mm
@ 7.6 kg/m2 for 4mm

Installation Service
The installation should be carried out by a Flowcrete
approved applicator. Obtain details of our approved

Focus on the Floorzone
Flowcrete Asia Sdn Bhd is a division of the Flowcrete
Group, world leaders in specialist industrial and
commercial flooring. Systems available include: underfloor
heating systems, floor screeds, surface damp proof
membranes, decorative floor finishes, seamless terrazzo,
car park deck waterproofing, tank lining systems. Our
objective is to satisfy your Floorzone needs.

Colour Stability
Flowfresh MF is not colour fast and may change colour
over time (exhibits a yellowing effect). Colour change
depends on the UV light and heat levels present and
hence the rate of change cannot be predicted. This is
more noticeable in light colours and blues but does not
compromise the product’s flexibility or chemical resistance

Microbial / Fungal Resistance
The Polygiene anti-microbial additive incorporated into
Flowfresh MF provides control of most bacteria and
fungi which come into contact with the floor

Technical Information
The figures that follow are typical properties achieved in
laboratory tests at 20 oC and at 50% Relative Humidity.
Fire Resistance BS476:Part 7 Surface Spread
of Flame: Class 2 (indicative)
Slip Resistance BS6677:Part 1 1986
Pendulum Slip Test
Dry 70 Wet 25 Wet Impact Resistance BS8204 Part1 Cat: A
ISO6272 1KG weight >1.8m
2kg weight >1.5m
Tolerant from -15oC to 70oC at
Water Permeability Nil–Karsten test
Vapour Permeability ASTM E96:90
5g/m/24hrs (at 4mm thick)
Chemical Resistance Go to
Excellent resistance to sugars
and most acids (organic and
Abrasion Resistance ASTM D4060 Taber Abrader:
25mg loss per 1000 cycles
(1kg load using H22
wheels)BS8204:Part 2:Class
Compressive Strength >50 N/mm2 (BS6319)
Flexural Strength 20 N/mm2 (BS6319)
Tensile Strength 12 N/mm2 (BS6319)
Bond Strength Greater than cohesive strength
of 25 N/mm2 concrete. >1.5

Speed of Cure
10°C 20°C 30°C
Light traffic 36 hrs 24 hrs 12 hrs
Full traffic 72 hrs 48 hrs 24 hrs
Full chemical cure 10days 7 days 5 days

Aftercare-Cleaning and Maintenance
Clean regularly using a single or double headed rotary
scrubber drier in conjunction with a mildly alkaline
detergent. Visit website for more information

Important Note
Flowcrete’s products are guaranteed against defective
materials and manufacture and are sold subject to its
standard Terms and Conditions of Sale, copies of which
can be obtained on request.

Further Information
To ensure you are specifying a fit for purpose flooring
system for your project please consult our Technical
Advisors on the number below or visit our website to
register your interest in specifying one of the most durable
floors on the market


Hi there! Click on our admin below and we'll get back to you shortly.

Chat WhatsApp